** d** 속성은 그릴 패스를 정의합니다.

A path definition is a list of path commands where each command is composed of a command letter and numbers that represent the command parameters. The commands are detailed below.

Three elements have this attribute: `<path>`

, `<glyph>`

, and `<missing-glyph>`

`html,body,svg { height:100% }`

```
<svg viewBox="0 0 100 100" xmlns="http://www.w3.org/2000/svg">
<path fill="none" stroke="red"
d="M 10,30
A 20,20 0,0,1 50,30
A 20,20 0,0,1 90,30
Q 90,60 50,90
Q 10,60 10,30 z" />
</svg>
```

## path

For `<path>`

, `d`

is a string containing a series of path commands that define the path to be drawn.

Value | <string> |
---|---|

Default value | none |

Animatable | Yes |

## glyph

**Warning:** As of SVG2 `<glyph>`

is deprecated and shouldn't be used.

For `<glyph>`

, `d`

is a string containing a series of path commands that define the outline shape of the glyph.

Value | <string> |
---|---|

Default value | none |

Animatable | Yes |

**Note:** The point of origin (the coordinate `0`

,`0`

) is usually the *upper left corner* of the context. However the `<glyph>`

element has its origin in the *bottom left corner* of its letterbox.

## missing-glyph

**Warning:** As of SVG2 `<missing-glyph>`

is deprecated and shouldn't be used.

For `<missing-glyph>`

, `d`

is a string containing a series of path commands that define the outline shape of the glyph.

Value | <string> |
---|---|

Default value | none |

Animatable | Yes |

## Path commands

Path commands are instructions that define a path to be drawn. Each command is composed of a command letter and numbers that represent the command parameters.

SVG defines 6 types of path commands, for a total of 20 commands:

- MoveTo:
`M`

,`m`

- LineTo:
`L`

,`l`

,`H`

,`h`

,`V`

,`v`

- Cubic Bézier Curve:
`C`

,`c`

,`S`

,`s`

- Quadratic Bézier Curve:
`Q`

,`q`

,`T`

,`t`

- Elliptical Arc Curve:
`A`

,`a`

- ClosePath:
`Z`

,`z`

**Note:** Commands are case-sensitive; an upper-case command specifies its arguments as absolute positions, while a lower-case command specifies points relative to the current position.

It is always possible to specify a negative value as an argument to a command: negative angles will be anti-clockwise; absolute x and y positions will be taken as negative coordinates; negative relative x values will move to the left; and negative relative y values will move upwards.

### MoveTo path commands

*MoveTo* instructions can be thought of as picking up the drawing instrument, and setting it down somewhere else, i.e. moving the *current point* (P_{o}; {x_{o}, y_{o}}). There is no line drawn between P_{o }and the new *current point* (P_{n}; {x_{n}, y_{n}}).

Command | Parameters | Notes |
---|---|---|

M | (`x` , `y` )+ |
Move the current point to the coordinate `x` ,`y` . Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit absolute LineTo (`L` ) command(s) (see below). Formula: P_{n} = {`x` , `y` } |

m | (`dx` , `dy` )+ |
Move the current point by shifting the last known position of the path by `dx` along the x-axis and by `dy` along the y-axis. Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit relative LineTo (`l` ) command(s) (see below). Formula: P_{n} = {x_{o} + `dx` , y_{o} + `dy` } |

#### Examples

`html,body,svg { height:100% }`

```
<svg viewBox="0 0 100 100" xmlns="http://www.w3.org/2000/svg">
<path fill="none" stroke="red"
d="M 10,10 h 10
m 0,10 h 10
m 0,10 h 10
M 40,20 h 10
m 0,10 h 10
m 0,10 h 10
m 0,10 h 10
M 50,50 h 10
m-20,10 h 10
m-20,10 h 10
m-20,10 h 10" />
</svg>
```

### LineTo path commands

*LineTo* instructions draw a straight line from the *current point* (P_{o}; {x_{o}, y_{o}}) to the *end point* (P_{n}; {x_{n}, y_{n}}), based on the parameters specified. The *end point *(P_{n}) then becomes the *current point *for the next command (P_{o}^{'}).

Command | Parameters | Notes |
---|---|---|

L | (`x` , `y` )+ |
Draw a line from the current point to the end point specified by `x` ,`y` . Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit absolute LineTo (`L` ) command(s). Formula: P_{o}^{'} = P_{n} = {`x` , `y` } |

l | (`dx` , `dy` )+ |
Draw a line from the current point to the end point, which is the current point shifted by `dx` along the x-axis and `dy` along the y-axis. Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit relative LineTo (`l` ) command(s) (see below). Formula: P_{o}^{'} = P_{n} = {x_{o} + `dx` , y_{o} + `dy` } |

H | `x` + |
Draw a horizontal line from the current point to the end point, which is specified by the `x` parameter and the current point's y coordinate. Any subsequent value(s) are interpreted as parameter(s) for implicit absolute horizontal LineTo (`H` ) command(s). Formula: P_{o}^{'} = P_{n} = {`x` , y_{o}} |

h | `dx` + |
Draw a horizontal line from the current point to the end point, which is specified by the current point shifted by `dx` along the x-axis and the current point's y coordinate. Any subsequent value(s) are interpreted as parameter(s) for implicit relative horizontal LineTo (`h` ) command(s). Formula: P_{o}^{'} = P_{n} = {x_{o} + `dx` , y_{o}} |

V | `y` + |
Draw a vertical line from the current point to the end point, which is specified by the `y` parameter and the current point's x coordinate. Any subsequent values are interpreted as parameters for implicit absolute vertical LineTo (`V` ) command(s). Formula: P_{o}^{'} = P_{n} = {x_{o}, `y` } |

v | `dy` + |
Draw a vertical line from the current point to the end point, which is specified by the current point shifted by `dy` along the y-axis and the current point's x coordinate. Any subsequent value(s) are interpreted as parameter(s) for implicit relative vertical LineTo (`v` ) command(s). Formula: P_{o}^{'} = P_{n} = {x_{o, }y_{o} + `dy` } |

#### Examples

`html,body,svg { height:100% }`

```
<svg viewBox="0 0 200 100" xmlns="http://www.w3.org/2000/svg">
<!-- LineTo commands with absolute coordinates -->
<path fill="none" stroke="red"
d="M 10,10
L 90,90
V 10
H 50" />
<!-- LineTo commands with relative coordinates -->
<path fill="none" stroke="red"
d="M 110,10
l 80,80
v -80
h -40" />
</svg>
```

### Cubic Bézier Curve

*Cubic Bézier curves* are smooth curve definitions using four points:

*starting point (current point)*(P_{o}= {x_{o}, y_{o}})*end point*(P_{n}= {x_{n}, y_{n}})*start control point*(P_{cs}= {x_{cs}, y_{cs}}) (controls curvature near the start of the curve)*end control point*(P_{ce}= {x_{ce}, y_{ce}}) (controls curvature near the end of the curve).

After drawing, the *end point *(P_{n}) becomes the *current point *for the next command (P_{o}').

Command | Parameters | Notes |
---|---|---|

C | (`x1` ,`y1` , `x2` ,`y2` , `x` ,`y` )+ |
Draw a cubic Bézier curve from the current point to the end point specified by `x` ,`y` . The start control point is specified by `x1` ,`y1` and the end control point is specified by `x2` ,`y2` . Any subsequent triplet(s) of coordinate pairs are interpreted as parameter(s) for implicit absolute cubic Bézier curve (`C` ) command(s). Formulae: P_{o}^{'} = P_{n} = {`x` , `y` } ; P_{cs} = {`x1` , `y1` } ; P_{ce} = {`x2` , `y2` } |

c | (`dx1` ,`dy1` , `dx2` ,`dy2` , `dx` ,`dy` )+ |
Draw a cubic Bézier curve from the current point to the end point, which is the current point shifted by `dx` along the x-axis and `dy` along the y-axis. The start control point is the current point (starting point of the curve) shifted by `dx1` along the x-axis and `dy1` along the y-axis. The end control point is the current point (starting point of the curve) shifted by `dx2` along the x-axis and `dy2` along the y-axis. Any subsequent triplet(s) of coordinate pairs are interpreted as parameter(s) for implicit relative cubic Bézier curve (`c` ) command(s). Formulae: P_{o}^{'} = P_{n} = {x_{o} + `dx` , y_{o} + `dy` } ; P_{cs} = {x_{o} + `dx1` , y_{o} + `dy1` } ; P_{ce} = {x_{o} + `dx2` , y_{o} + `dy2` } |

S | (`x2` ,`y2` , `x` ,`y` )+ |
Draw a smooth cubic Bézier curve from the current point to the end point specified by `x` ,`y` . The end control point is specified by `x2` ,`y2` . The start control point is a reflection of the end control point of the previous curve command. If the previous command wasn't a curve, the start control point is the same as the curve starting point (current point). Any subsequent pair(s) of coordinate pairs are interpreted as parameter(s) for implicit absolute smooth cubic Bézier curve (`S` ) commands. |

s | (`dx2` ,`dy2` , `dx` ,`dy` )+ |
Draw a smooth cubic Bézier curve from the current point to the end point, which is the current point shifted by `dx` along the x-axis and `dy` along the y-axis. The end control point is the current point (starting point of the curve) shifted by `dx2` along the x-axis and `dy2` along the y-axis. The start control point is a reflection of the end control point of the previous curve command. If the previous command wasn't a curve, the start control point is the same as the curve starting point (current point). Any subsequent pair(s) of coordinate pairs are interpreted as parameter(s) for implicit relative smooth cubic Bézier curve (`s` ) commands. |

#### Examples

`html,body,svg { height:100% }`

```
<svg viewBox="0 0 200 100" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<!-- Cubic Bézier curve with absolute coordinates -->
<path fill="none" stroke="red"
d="M 10,90
C 30,90 25,10 50,10
S 70,90 90,90" />
<!-- Cubic Bézier curve with relative coordinates -->
<path fill="none" stroke="red"
d="M 110,90
c 20,0 15,-80 40,-80
s 20,80 40,80" />
<!-- Highlight the curve vertex and control points -->
<g id="ControlPoints">
<!-- First cubic command control points -->
<line x1="10" y1="90" x2="30" y2="90" stroke="lightgrey" />
<circle cx="30" cy="90" r="1.5"/>
<line x1="50" y1="10" x2="25" y2="10" stroke="lightgrey" />
<circle cx="25" cy="10" r="1.5"/>
<!-- Second smooth command control points (the first one is implicit) -->
<line x1="50" y1="10" x2="75" y2="10" stroke="lightgrey" stroke-dasharray="2" />
<circle cx="75" cy="10" r="1.5" fill="lightgrey"/>
<line x1="90" y1="90" x2="70" y2="90" stroke="lightgrey" />
<circle cx="70" cy="90" r="1.5" />
<!-- curve vertex points -->
<circle cx="10" cy="90" r="1.5"/>
<circle cx="50" cy="10" r="1.5"/>
<circle cx="90" cy="90" r="1.5"/>
</g>
<use xlink:href="#ControlPoints" x="100" />
</svg>
```

### Quadratic Bézier Curve

*Quadratic Bézier curves* are smooth curve definitions using three points:

*starting point (current point)*(P_{o}= {x_{o}, y_{o}})*end point*(P_{n}= {x_{n}, y_{n}})*control point*(P_{c}= {x_{c}, y_{c}}) (controls curvature)

After drawing, the *end point *(P_{n}) becomes the *current point *for the next command (P_{o}').

Command | Parameters | Notes |
---|---|---|

Q | (`x1` ,`y1` , `x` ,`y` )+ |
Draw a quadratic Bézier curve from the current point to the end point specified by `x` ,`y` . The control point is specified by `x1` ,`y1` . Any subsequent pair(s) of coordinate pairs are interpreted as parameter(s) for implicit absolute quadratic Bézier curve (`Q` ) command(s). Formulae: P_{o}^{'} = P_{n} = {`x` , `y` } ; P_{c} = {`x1` , `y1` } |

q | (`dx1` ,`dy1` , `dx` ,`dy` )+ |
Draw a quadratic Bézier curve from the current point to the end point, which is the current point shifted by `dx` along the x-axis and `dy` along the y-axis. The control point is the current point (starting point of the curve) shifted by `dx1` along the x-axis and `dy1` along the y-axis. Any subsequent pair(s) of coordinate pairs are interpreted as parameter(s) for implicit relative quadratic Bézier curve (`q` ) command(s). Formulae: P_{o}^{'} = P_{n} = {x_{o} + `dx` , y_{o} + `dy` } ; P_{c} = {x_{o} + `dx1` , y_{o} + `dy1` } |

T | (`x` ,`y` )+ |
Draw a smooth quadratic Bézier curve from the current point to the end point specified by `x` ,`y` . The control point is a reflection of the control point of the previous curve command. If the previous command wasn't a curve, the control point is the same as the curve starting point (current point). Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit absolute smooth quadratic Bézier curve (`T` ) command(s). Formula: P_{o}^{'} = P_{n} = {`x` , `y` } |

t | (`dx` ,`dy` )+ |
Draw a smooth quadratic Bézier curve from the current point to the end point, which is the current point shifted by `dx` along the x-axis and `dy` along the y-axis. The control point is a reflection of the control point of the previous curve command. If the previous command wasn't a curve, the control point is the same as the curve starting point (current point). Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit relative smooth quadratic Bézier curve (`t` ) command(s). Formulae: P_{o}^{'} = P_{n} = {x_{o} + `dx` , y_{o} + `dy` } |

#### Examples

`html,body,svg { height:100% }`

```
<svg viewBox="0 0 200 100" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<!-- Quadratic Bézier curve with implicite repetition -->
<path fill="none" stroke="red"
d="M 10,50
Q 25,25 40,50
t 30,0 30,0 30,0 30,0 30,0" />
<!-- Highlight the curve vertex and control points -->
<g>
<polyline points="10,50 25,25 40,50" stroke="rgba(0,0,0,.2)" fill="none" />
<circle cx="25" cy="25" r="1.5" />
<!-- curve vertex points -->
<circle cx="10" cy="50" r="1.5"/>
<circle cx="40" cy="50" r="1.5"/>
<g id="SmoothQuadraticDown">
<polyline points="40,50 55,75 70,50" stroke="rgba(0,0,0,.2)" stroke-dasharray="2" fill="none" />
<circle cx="55" cy="75" r="1.5" fill="lightgrey" />
<circle cx="70" cy="50" r="1.5" />
</g>
<g id="SmoothQuadraticUp">
<polyline points="70,50 85,25 100,50" stroke="rgba(0,0,0,.2)" stroke-dasharray="2" fill="none" />
<circle cx="85" cy="25" r="1.5" fill="lightgrey" />
<circle cx="100" cy="50" r="1.5" />
</g>
<use xlink:href="#SmoothQuadraticDown" x="60" />
<use xlink:href="#SmoothQuadraticUp" x="60" />
<use xlink:href="#SmoothQuadraticDown" x="120" />
</g>
</svg>
```

### Elliptical Arc Curve

*Elliptical arc curves* are curves define as a portion of an ellipse. It is sometimes easier than Bézier curve to draw highly regular curves.

Command | Parameters | Notes |
---|---|---|

A | (`rx` `ry` `angle` `large-arc-flag` `sweep-flag` `x` `y` )+ |
Draw an Arc curve from the current point to the coordinate `rx` and`ry` are the two radii of the ellipse;`angle` represents a rotation (in degree) of the ellipse relative to the x-axis;`large-arc-flag` and`sweep-flag` allows to chose which arc must be drawn as 4 possible arcs can be drawn out of the other parameters.`large-arc-flag` allows to chose one of the large arc (**1**) or small arc (**0**),`sweep-flag` allows to chose one of the clockwise turning arc (**1**) or anticlockwise turning arc (**0**)
`x` ,`y` become the new current point for the next command. All subsequent sets of parameters are considered implicit absolute arc curve (`A` ) commands. |

a | (`rx` `ry` `angle` `large-arc-flag` `sweep-flag` `dx` `dy` )+ |
Draw an Arc curve from the current point to to a point for which coordinates are those of the current point shifted by `rx` and`ry` are the two radii of the ellipse;`angle` represents a rotation (in degree) of the ellipse relative to the x-axis;`large-arc-flag` and`sweep-flag` allows to chose which arc must be drawn as 4 possible arcs can be drawn out of the other parameters.`large-arc-flag` allows to chose one of the large arc (**1**) or small arc (**0**),`sweep-flag` allows to chose one of the clockwise turning arc (**1**) or anticlockwise turning arc (**0**)
`dx` and `dy` for the next command. All subsequent sets of parameters are considered implicit relative arc curve (`a` ) commands. |

#### Examples

`html,body,svg { height:100% }`

```
<svg viewBox="0 0 20 20" xmlns="http://www.w3.org/2000/svg">
<!-- The influence of the arc flags on which arc is drawn -->
<path fill="none" stroke="red"
d="M 6,10
A 6 4 10 1 0 14,10" />
<path fill="none" stroke="lime"
d="M 6,10
A 6 4 10 1 1 14,10" />
<path fill="none" stroke="purple"
d="M 6,10
A 6 4 10 0 1 14,10" />
<path fill="none" stroke="pink"
d="M 6,10
A 6 4 10 0 0 14,10" />
</svg>
```

### ClosePath

*ClosePath* instructions draw a straight line from the current position, to the first point in the path.

Command | Parameters | Notes |
---|---|---|

Z, z | Close the current subpath by connecting the last point of the path with its initial point. If the two points doesn't have the same coordinates, a straight line is drawn between those two points. |

**Note:** The appearance of a shape closed with closepath may be different to that of one closed by drawing a line to the origin, using one of the other commands, because the line ends are joined together (according to the `stroke-linejoin`

setting), rather than just being placed at the same coordinates.

#### Examples

`html,body,svg { height:100% }`

```
<svg viewBox="0 -1 30 11" xmlns="http://www.w3.org/2000/svg">
<!--
An open shape with the last point of
the path different than the first one
-->
<path stroke="red"
d="M 5,1
l -4,8 8,0" />
<!--
An open shape with the last point of
the path matching the first one
-->
<path stroke="red"
d="M 15,1
l -4,8 8,0 -4,-8" />
<!--
An closed shape with the last point of
the path different than the first one
-->
<path stroke="red"
d="M 25,1
l -4,8 8,0
z" />
</svg>
```

## Specification

Specification | Status | Comment |
---|---|---|

Scalable Vector Graphics (SVG) 2 The definition of 'd' in that specification. |
Candidate Recommendation | Definition for `<path>` |

Scalable Vector Graphics (SVG) 1.1 (Second Edition) The definition of 'd' in that specification. |
Recommendation | Initial definition for `<glyph>` and `<missing-glyph>` |

Scalable Vector Graphics (SVG) 1.1 (Second Edition) The definition of 'd' in that specification. |
Recommendation | Initial definition for `<path>` |