This translation is incomplete. Please help translate this article from English
通常来说这一机制总是由客户端发起的 （不过也有例外，比如说可以由服务端发起升级到传输层安全协议（TLS））， 服务端可以选择是否要升级到新协议。借助这一技术，连接可以以常用的协议启动（如HTTP/1.1），随后再升级到HTTP2甚至是WebSockets.
The 101 status code
101 status code is sent as a response to an request including the
"Upgrade" header to signal that the recipient of the request is willing to upgrade to one of the desired protocols. If the
"101 Switching Protocols" status code is returned, the header must also include the
Upgrade headers to describe the chosen protocol. See the examples in Common uses for this mechanism to learn more about how this works.
While you can use the protocol upgrade mechanism to upgrade an HTTP/1.1 connection to HTTP/2, you can't go the other way. In fact, the 101 status code is no longer supported at all in HTTP/2, since HTTP/2 doesn't have an upgrade mechanism.
Common uses for this mechanism
Here we look at the most common use cases for the
Upgrading to an HTTP/2 connection
It's standard procedure to start a connection using HTTP/1.1, due to its broad support, then request an upgrade to HTTP/2. This way, you have a functioning connection still even if HTTP/2 isn't supported by the server. However, you can only upgrade to an insecure (cleartext) HTTP/2 connection. This is done using the target protocol name
h2c, which stands for "HTTP/2 Cleartext". This also requires the specification of the
HTTP2-Settings header field.
GET / HTTP/1.1 Host: destination.server.ext Connection: Upgrade, HTTP2-Settings Upgrade: h2c HTTP2-Settings: base64EncodedSettings
base64EncodedSettings is an HTTP/2
"SETTINGS" frame's payload which has been base64url encoded and all trailing
"=" (equals) characters removed in order to safely include it in this textual header format.
The base64url format is not the same as standard Base64 encoding. This is almost but not quite the same as standard Base64. The only difference: in order to ensure that the resulting string is safe for use in both URLs and filenames, the 62nd and 63rd characters in its alphabet are changed from
"-" (minus) and
"_" (underscore), respectively.
If the server is unable to switch to HTTP/2 for any reason, it will reply with a standard HTTP/1 reply after handling the request as normal. So if the request was to fetch a web page which does in fact exist, you would get a standard
"HTTP/1.1 200 OK" response with the web page following the remainder of the header. If the server is able to switch to HTTP/2, an "
HTTP/1.1 101 Switching Protocols" response is sent, which will look like this:
HTTP/1.1 101 Switching Protocols Connection: Upgrade Upgrade: h2c [standard HTTP/2 server connection preface, etc.]
After the HTTP/1.1 header and the blank line that indicates the end of the header, the server will immediately include the server connection preface, starting with a
Upgrading to a WebSocket connection
By far, the most common use case for upgrading an HTTP connection is to use WebSockets, which are always implemented by upgrading an HTTP or HTTPS connection. Keep in mind that if you're opening a new connection using the WebSocket API, or any library that does WebSockets, most or all of this is done for you. For example, opening a WebSocket connection is as simple as:
webSocket = new WebSocket("ws://destination.server.ext", "optionalProtocol");
WebSocket() constructor does all the work of creating an initial HTTP/1.1 connection then handling the handshaking and upgrade process for you.
You can also use the
"wss://" URL scheme to open a secure WebSocket connection.
If you need to create a WebSocket connection from scratch, you'll have to handle the handshaking process yourself. After creating the initial HTTP/1.1 session, you need to request the upgrade by adding to a standard request the
Connection headers, as follows:
Connection: Upgrade Upgrade: websocket
The following headers are involved in the WebSocket upgrade process. Other than the
Connection headers, the rest are generally optional or handled for you by the browser and server when they're talking to each other.
Specifies one or more protocol-level WebSocket extensions to ask the server to use. Using more than one
Sec-WebSocket-Extension header in a request is permitted; the result is the same as if you included all of the listed extensions in one such header.
- A comma-separated list of extensions to request (or agree to support). These should be selected from the IANA WebSocket Extension Name Registry. Extensions which take parameters do so using semicolon delineation.
Sec-WebSocket-Extensions: superspeed, colormode; depth=16
Provides information to the server which is needed in order to confirm that the client is entitled to request an upgrade to WebSocket. This header can be used when insecure (HTTP) clients wish to upgrade, in order to offer some degree of protection against abuse. The value of the key is computed using an algorithm defined in the WebSocket specification, so this does not provide security. Instead, it helps to prevent non-WebSocket clients from inadvertently, or through misuse, requesting a WebSocket connection. In essence, then, this key simply confirms that "Yes, I really mean to open a WebSocket connection."
This header is automatically added by clients that choose to use it; it cannot be added using the
- The key for this request to upgrade. The client adds this if it wishes to do so, and the server will include in the response a key of its own, which the client will validate before delivering the upgrade reponse to you.
The server's response's
Sec-WebSocket-Accept header will have a value computed based upon the specified
Sec-WebSocket-Protocol header specifies one or more WebSocket protocols that you wish to use, in order of preference. The first one that is supported by the server will be selected and returned by the server in a
Sec-WebSocket-Protocol header included in the response. You can use this more than once in the header, as well; the result is the same as if you used a comma-delineated list of subprotocol identifiers in a single header.
- A comma-separated list of subprotocol names, in the order of preference. The subprotocols may be selected from the IANA WebSocket Subprotocol Name Registry or may be a custom name jointly understood by the client and the server.
Specifies the WebSocket protocol version the client wishes to use, so the server can confirm whether or not that version is supported on its end.
- The WebSocket protocol version the client wishes to use when communicating with the server. This number should be the most recent version possible listed in the IANA WebSocket Version Number Registry. The most recent final version of the WebSocket protocol is version 13.
If the server can't communicate using the specified version of the WebSocket protocol, it will respond with an error (such as 426 Upgrade Required) that includes in its headers a
Sec-WebSocket-Version header with a comma-separated list of the supported protocol versions. If the server does support the requested protocol version, no
Sec-WebSocket-Version header is included in the response.
- A comma-delineated list of the WebSocket protocol versions supported by the server.
The response from the server may include these.
Included in the response message from the server during the opening handshake process when the server is willing to initiate a WebSocket connection. It will appear no more than once in the repsonse headers.
- If a
Sec-WebSocket-Keyheader was provided, the value of this header is computed by taking the value of the key, concatenating the string "258EAFA5-E914-47DA-95CA-C5AB0DC85B11" to it, taking the SHA-1 hash of that concatenated string, resulting in a 20-byte value. That value is then base64 encoded to obtain the value of this property.
Client-initiated upgrade to HTTP over TLS
You can also upgrade an HTTP/1.1 connection to TLS/1.0. The main advantages to this are that you can avoid using URL redirection from "http://" to "https://" on the server and you can easily use TLS on virtual hosts. This may, however, introduce problems with proxy servers.
Upgrading an HTTP connection to use TLS uses the
Upgrade header with the token
"TLS/1.0". If the switch is made successfully, the original request (which included
Upgrade) is completed as normal, but on the TLS connection.
The request to TLS can be made either optionally or mandatorily.
To upgrade to TLS optionally (that is, allowing the connection to continue in cleartext if the upgrade to TLS fails), you simply use the
Connection headers as expected. For example, given the original request:
GET http://destination.server.ext/secretpage.html HTTP/1.1 Host: destination.server.ext Upgrade: TLS/1.0 Connection: Upgrade
If the server does not support TLS upgrade, or is unable to upgrade to TLS at the time, it responds with a standard HTTP/1.1 response, such as:
HTTP/1.1 200 OK Date: Thu, 17 Aug 2017 21:07:44 GMT Server: Apache Last-Modified: Thu, 17 Aug 2017 08:30:15 GMT Content-Type: text/html; charset=utf-8 Content-Length: 31374 <html> ... </html>
If the server does support TLS upgrade and wishes to permit the upgrade, it responds with the
"101 Switching Protocols" response code, like this:
HTTP/1.1 101 Switching Protocols Upgrade: TLS/1.0, HTTP/1.1
Once the TLS handshake is complete, the original request will be responded to as normal.
To request a mandatory upgrade to TLS—that is, to upgrade and fail the connection if the upgrade is not successful—your first request must be an
OPTIONS request, like this:
OPTIONS * HTTP/1.1 Host: destination.server.ext Upgrade: TLS/1.0 Connection: Upgrade
If the upgrade to TLS succeeds, the server will respond with
"101 Switching Protocols" as described in the previous section. If the upgrade fails, the HTTP/1.1 connection will fail.
Server-initiated upgrade to TLS
This works roughly the same way as a client-initiated upgrade; an optional upgrade is requested by adding the
Upgrade header to any message. A mandatory upgrade, though, works slightly differently, in that it requests the upgrade by replying to a message it receives with the
426 status code, like this:
HTTP/1.1 426 Upgrade Required Upgrade: TLS/1.1, HTTP/1.1 Connection: Upgrade <html> ... Human-readable HTML page describing why the upgrade is required and what to do if this text is seen ... </html>
If the client receiving the
"426 Upgrade Required" response is willing and able to upgrade to TLS, it should then start the same process covered above under Client-initiated upgrade to TLS.